Recently added our store
Additional data |
|
|---|---|
| Rated input power | 750 W |
| Weight | 1.8 kg |
| No-load speed, 1st gear | 0 – 3,250 rpm |
| Rated torque | 2.1 Nm |
| Chuck capacity, min./max. | 1.5 – 13 mm |
| Tool dimensions (width) | 70 mm |
| Tool dimensions (length) | 270 mm |
| Tool dimensions (height) | 190 mm |
| Impact rate at no-load speed | 0 – 48,500 bpm |
Drilling range |
|
|---|---|
| Drilling diameter in concrete | 16 mm |
| Drilling diameter in wood | 25 mm |
| Drilling diameter in steel | 12 mm |
The A-rated noise level of the power tool is typically as follows: Sound pressure level dB(A); Sound power level dB(A). Uncertainty K= dB.
Additional data |
|
|---|---|
| Laser diode | 635 nm, < 1 mW |
| Measurement range | 0.15 – 20.00 m |
| Weight, approx. | 0.13 kg |
| Measurement time, typical | <0.5 s |
| Units of measurement | m/cm, ft/inch |
| Laser class | 2 |
| Measurement accuracy, typical | ± 3.0 mm* (*plus use-dependent deviation) |
| Power supply | 2 x 1.5 V LR03 (AAA) |
| Automatic deactivation | 5 min |
| Battery lifetime, individual measurements, approx. | 5,000 |
| Battery lifetime, operating time, approx. | 5 h |
| Laser colour | Red |
| Measuring range, up to | 20 m |
Additional data |
|
|---|---|
| Rated input power | 920 W |
| Torque, max. (hard screwdriving applications) | 1,000 Nm |
| Torque, max. (soft screwdriving applications) | 500 Nm |
| Bit holder | 1″ external square |
| Rated speed | 860 rpm |
| Weight | 7.3 kg |
| Tool dimensions (length) | 431 mm |
| Tool dimensions (height) | 436 mm |
Screwdriving |
|
|---|---|
| Max. screw diameter | max. M 30 |
Total vibration values (Tightening screws and nuts of maximum permitted size) |
|
|---|---|
| Vibration emission value ah | 4 m/s² |
| Uncertainty K | 0.5 m/s² |
Noise/vibration information |
|
|---|---|
| Sound pressure level | 100 dB(A) |
| Sound power level | 113 dB(A) |
| Uncertainty K | 3 dB |
Tightening screws and nuts of maximum permitted size |
|
|---|---|
| Vibration emission value ah | 4 m/s² |
| Uncertainty K | 0.5 m/s² |
The A-rated noise level of the power tool is typically as follows: Sound pressure level dB(A); Sound power level dB(A). Uncertainty K= dB.
Subscribe to get the latest news and updates from Ujenzi Distributors
